Pipe Sock™
Pipe Sock™ Corrosion Prevention Pipe Repair Systems Selangor, Malaysia, Kuala Lumpur (KL), Subang Jaya Services | Sceptre Power Sdn Bhd
Download Files
PipeSock-Data-Sheet.pdf (568.54 KB)

The Pipe Sock™ system is a fiber-reinforced polymer designed to eliminate crevice corrosion problems caused by direct metal-to-metal contact. It consists of a pre-formed, size specific fiberglass wear pad and a specially formulated adhesive system that combines to form a resilient crevice corrosion solution. Additionally, it can withstand temperatures up to 250° F and provide complete fit-up integrity with the pipe, eliminating moisture penetration and condensation cavities.

Technical Specs

Mechanical Properties

Attribute Tensile Strength
Method ASTM D 3039
Value 54,000 psi

Attribute Compression Strength
Method ASTM D 695
Value 28,500 psi

Attribute Barcol Hardness
Method ASTM D 2583
Value 53
Thermal Properties

Attribute Max Operating Temperature
Value 250° F (121 °C)

Attribute Application Temperature
Value 41 °F to 95° F (5 °C to 35 °C)
System Properties

Attribute Wear Pad Thickness
Value 0.25 inches (6.35 mm)

Attribue Shelf Life – Black Magic ™
Value 18 months


1. Remove Pipe from Support

Lift the corroded pipe off support or stanchion.
2. Surface Inspection and Preparation

Brush contact surface with a wire brush and lightly abrade with sandpaper to remove loose dirt and scale. Inspect the area and repair any anomalies, as required.
3. Apply Black Magic

Remove release liner from the PipeSock™ and apply Black Magic™adhesive to the inside of the PipeSock™.
4. Install PipeSock™ and Reposition Pipe

Carefully position the PipeSock™ on the pipe. Then, lower the pipe on to the support. Taper any excess material with a putty knife.

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version