Active Leak Repair Kit™ (ALRK™)
Active Leak Repair Kit™ (ALRK™) Leak Repair Pipe Repair Systems Selangor, Malaysia, Kuala Lumpur (KL), Subang Jaya Services | Sceptre Power Sdn Bhd
Download Files
ALRK-Data-Sheet_final.pdf (355.52 KB)

Active Leak Repair Kit™ is an easy-to-install compression seal system designed for active leaks up to 75 psi. It consists of a compression strap – suitable for operations handling water, harsh chemicals and high heat – combined with a resin fiberglass outer wrap that hardens around it, securing the strap in place and protecting it from mechanical damage.


1. Secure the leak with QuickStrap™

Starting opposite the leak, apply QuickStrap™ tightly around the pipe, layer over layer. Then, secure the end with tape.
2. Prepare the Pipe Surface

​Mark and abrade the surface to provide an anchor pattern. Solvent wipe the surface and allow the solvent to flash off.
3. Apply Pipe Wrap® and Topcoat

Remove Pipe Wrap® from the foil pouch and immerse in water to activate the resin. Apply provided Pipe Wrap® using the cigar wrap method. A topcoat may be applied after two hours.

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version