Dry-Break Couplers & Adapters - Emco Wheaton
Quantity
Emco Wheaton DRY-BREAK couplers and DRY-BREAK adapters are designed for total safety.
Fluid cannot flow until the Emco Wheaton coupler has been locked into position on an Emco Wheaton Adapter and the valve opened. The coupler can only be disconnected from the adapter when the valve has been closed. Since product loss is thereby eliminated, possible hazards associated with leakage at disconnect are no longer a concern
DRY-BREAK couplers and adapters are rated for a working pressure of 85 psi (PN 6) and are available in sizes ranging from 1-inch up to 3-inch in diameter with a variety of body construction and seal materials available.
Specifications
Other material/seal options available, please contact customer service
Variants
Fluid cannot flow until the Emco Wheaton coupler has been locked into position on an Emco Wheaton Adapter and the valve opened. The coupler can only be disconnected from the adapter when the valve has been closed. Since product loss is thereby eliminated, possible hazards associated with leakage at disconnect are no longer a concern
DRY-BREAK couplers and adapters are rated for a working pressure of 85 psi (PN 6) and are available in sizes ranging from 1-inch up to 3-inch in diameter with a variety of body construction and seal materials available.
Specifications
Sizes Available: | Body Construction - Adapter: | Body Construction - Coupler | Seal Materials Available: |
J71 1-inch | Brass, Stainless | Aluminum, Brass nickel plated | Buna, Viton, Chemraz |
J72 2-inch | Aluminum, Brass, Stainless | Aluminum, Stainless | Buna, Viton, Chemraz |
J79 1.5inch inlet (mates with J72) | Aluminum | Aluminum | Buna, Viton, Chemraz |
J73 3-inch | Aluminum, Brass | Aluminum | Buna, Viton, Chemraz, Low Temp Buna |
ISO 7 | Aluminum | Aluminum | Buna, Viton, Chemraz |
Other material/seal options available, please contact customer service
Variants